How to Adjust and Use Bolt Cutters: Bolt cutters are used to cut very thick materials. They come in various sizes and shapes and all of these types have individualized functions.
They minimize the risk of using chain saws or metal pipes and produce considerably less noise. Therefore, this is a tool that all homeowners must have in their toolkit. Adjusting bolt cutters for use is quite simple and all you need to do is follow the simple steps outlined below.
Hand tools and power tools are incredibly vital to many job sectors and industries as the following list.
- Top 3 best bolt cutters for master lock
- 10 Best Tools needed to work on Harley Davidson
- 5 Best Tool to break car window glass
- Top 10 Largest snap on the tool set
- Best Tool to remove shower head replacement
- Where is the jeep tool kit located
- Narrow width truck tool boxes
- Where is the jeep wrangler tool kit located
- Complete mechanics tool set with box
Positioning the Bolt Cutter
All bolt cutters have a bolt known as a runout bolt in the head. This is usually the center bolt near the handle joint area. It is this bolt that needs adjustment to provide the cutters with the necessary tension. Lay the cutter on its side. This will let the hex eccentric bolt face up.
Loosening the Bolt Cutter Eccentricity
Now, use a wrench and loosen the bolt by turning the wrench counterclockwise. It is recommended that the bolts are not completely removed. Just make sure the bolt is loose enough to loosen the two halves of the cutter.
Remember not to over-tighten the screws while handling them; otherwise, the screw threads will be damaged. Work with the bolts carefully to avoid any frustration.
Adjusting the Bolt Cutter | How to Adjust Bolt Cutters
Once the two halves have loosened enough, place the paper between them. Begin to screw in the bolt clockwise until the cutters are at the point of pressing down on the paper. After the bolt cutter has been accustomed, check it on the material that has a need for cutting.
If the bolt cutter needs more adjustment, follow the steps mentioned above again. Use a grease cleaner to clean the bolts if they are clogged with dirt and grease. This will not only help in the proper fit but will also make the process easier.
Sharpening the Bolt Cutter Blades | How to Sharpen Bolt Cutters
Bolt cutters also malfunction when their metal blades are not sharp. Instead of replacing these blades, take the most convenient approach: use a wet stone to sharpen them by rubbing the angle of the blade to ensure proper sharpening. Be sure to wear gloves while doing this to avoid injury.
How to Adjust the Jaws on Bolt Cutters | Bolt Cutter Head Adjustment
The position of the bolt cutter blades can be adjusted using the jaw adjustment bolts, located on the plate that is mounted between the two jaws, or the neck adjustment bolt.
located near where the blade meets the handle on one side of the tool. (If your bolt cutters have two adjusting bolts, there will be one on each side.) Both kinds of adjusting bolts are eccentric, that is, they have a disproportionately shaped shaft comparable to a cam.
As a result, turning the bolt will cause part of the blade to move towards or away from the joint, adjusting the gap between the blades or the angle at which one blade is placed.
WORKPRO 8-Inch Mini Bolt Cutter - Compact, Spring-Loaded, Heavy-Duty Wire and Cable Clippers with Soft Anti-Slip Handle
Description
Experience the cutting-edge performance of the WORKPRO 8-Inch Mini Bolt Cutter. This compact and spring-loaded tool is designed for heavy-duty wire and cable cutting, ensuring efficiency and precision in every use. The ergonomic soft anti-slip handle provides a comfortable grip, enhancing control and reducing fatigue during extended use. Elevate your cutting experience with this versatile and reliable mini bolt cutter from WORKPRO.
Specifications
- Size: 8 inches
- Design: Mini Bolt Cutter
- Operation: Spring Loaded
- Application: Heavy-Duty Wire and Cable Cutting
- Handle: Soft Anti-Slip for Comfortable Grip
Key Features:
- Compact Design: The 8-inch size makes it easy to handle and maneuver, especially in tight spaces.
- Spring-Loaded Operation: Effortlessly cut through wires and cables with the spring-loaded mechanism for enhanced efficiency.
- Heavy-Duty Performance: Engineered for robust cutting tasks, ensuring durability and reliability.
- Anti-Slip Handle: The soft anti-slip handle provides a comfortable and secure grip for precise control.
- Versatile Use: Ideal for various applications, including DIY projects, repairs, and professional tasks.
Pros
- Compact size for easy handling.
- Effortless cutting with spring-loaded operation.
- Heavy-duty construction for durability.
- Comfortable grip with anti-slip handle.
- Versatile tool for various cutting tasks.
Cons
- Limited to a maximum cutting capacity of 8 inches.
- May not be suitable for extremely thick cables.
- Spring tension may require adjustment over time.
Pros
Cons
- Compact size for easy handling.
- Effortless cutting with spring-loaded operation.
- Heavy-duty construction for durability.
- Comfortable grip with anti-slip handle.
- Versatile tool for various cutting tasks.
- Limited to a maximum cutting capacity of 8 inches.
- May not be suitable for extremely thick cables.
- Spring tension may require adjustment over time.
KSEIBI 141585 24-Inch Heavy-Duty Medium Size Bolt Cutter - Ideal for Cutting Fence, Steel Wire, Chain, Screws, Rivets, and Medium Padlocks, Featuring Soft Grip Rubber Ergonomic Handle
Description
Introducing the KSEIBI 141585 Heavy-Duty 24-Inch Bolt Cutter, crafted for exceptional performance in cutting fence, steel wire, chain, screws, rivets, and medium padlocks. Equipped with a soft grip rubber ergonomic handle, this medium-sized bolt cutter delivers precision and comfort in every cut. Elevate your cutting experience with the reliability and durability of the KSEIBI 141585 Bolt Cutter.
Specifications
- Size: 24 inches
- Type: Medium Size Bolt Cutter
- Suitable for: Cutting Fence, Steel Wire, Chain, Screws, Rivets, and Medium Padlocks
- Handle: Soft Grip Rubber Ergonomic Handle
Key Features:
- Heavy-Duty Construction: Built to handle tough cutting tasks with ease.
- Medium Size Design: A versatile 24-inch length for a balance of power and maneuverability.
- Multi-Purpose Use: Ideal for cutting fence, steel wire, chain, screws, rivets, and medium padlocks.
- Soft Grip Rubber Handle: Ergonomically designed for a comfortable and secure grip during extended use.
- Durable and Reliable: Crafted for longevity, providing consistent performance over time.
Pros
- Robust 24-inch size for versatile cutting applications.
- Heavy-duty construction ensures durability.
- Suitable for various materials, including steel wire and medium padlocks.
- Ergonomic soft grip rubber handle for comfortable use.
- Reliable and consistent cutting performance.
Cons
- Size may be too large for precision cutting in tight spaces.
- Not suitable for cutting extremely thick or hardened materials.
- May require more effort for prolonged cutting tasks.
Pros
Cons
- Robust 24-inch size for versatile cutting applications.
- Heavy-duty construction ensures durability.
- Suitable for various materials, including steel wire and medium padlocks.
- Ergonomic soft grip rubber handle for comfortable use.
- Reliable and consistent cutting performance.
- Size may be too large for precision cutting in tight spaces.
- Not suitable for cutting extremely thick or hardened materials.
- May require more effort for prolonged cutting tasks.
KNIPEX 71 01 200 CoBolt Compact Bolt Cutter (7101200) - 8-Inch Precision Cutting Tool
Description
Experience precision cutting with the KNIPEX 71 01 200 CoBolt Compact Bolt Cutter (7101200). This 8-inch tool is expertly designed for efficient and accurate cutting, making it an essential addition to your toolkit. The CoBolt Compact Bolt Cutter is crafted by KNIPEX, a trusted name in tools, ensuring reliability and performance in every cut.
Specifications
- Model: 71 01 200 CoBolt Compact Bolt Cutter
- Size: 8 inches
- Type: Precision Cutting Tool
Key Features:
- Compact Design: The 8-inch size offers a perfect balance of portability and cutting power.
- Precision Cutting: Engineered for accurate and efficient cutting tasks.
- Quality Construction: Crafted by KNIPEX, a reputable brand known for high-quality tools.
- Versatile Use: Ideal for various applications, from DIY projects to professional tasks.
Pros
- Precise 8-inch cutting tool for versatile use.
- Crafted by KNIPEX, ensuring quality and durability.
- Compact design for easy handling and maneuverability.
- Suitable for a wide range of cutting tasks.
- Trusted brand known for reliable tools.
Cons
- May not be suitable for cutting extremely thick materials.
- Limited to an 8-inch size, may not be ideal for larger cutting tasks.
- Precision cutting may require additional effort compared to heavy-duty cutters.
Pros
Cons
- Precise 8-inch cutting tool for versatile use.
- Crafted by KNIPEX, ensuring quality and durability.
- Compact design for easy handling and maneuverability.
- Suitable for a wide range of cutting tasks.
- Trusted brand known for reliable tools.
- May not be suitable for cutting extremely thick materials.
- Limited to an 8-inch size, may not be ideal for larger cutting tasks.
- Precision cutting may require additional effort compared to heavy-duty cutters.
Instructions and Guidance
While doing all of this, make sure you don\’t injure yourself, as bolt cutter cutters can be extremely sharp. Handle tools with great care while adjusting them.
Also, make sure the bolt cutter has been adjusted as needed before using it for cutting as it gets quite annoying when the requirement for adjustment is felt during the cutting process.
In case the screws are stuck, use oil or grease to facilitate their removal. Gloves are recommended to avoid contact with grease and dirt that can get caught in the bolts and to ensure a proper grip on the wrench.
Work at a stable workbench to ensure adequate control over your work and wear a mask while using the spray grease cleaner and hold the can 15 inches from the studs to ensure proper application.
